Creating Users - NEC Univerge SV8100 User Manual

Revision 1.0
___________________________________________________________________________________
2.9
___________________________________________________________________________________
1 - 10

Creating Users

This section explains how to set up your users. Creating users is useful if you
want to view conference attendees by name, based on their source number
(commonly referred to as Caller ID).
Caller ID information is not provided on calls transferred to the RGA

Conference. Inbound trunk calls must be directed to the conference pilot
for Caller ID to be provided.
Moderators must manually add users. The system administrator can also
import users into the address book via active directory synchronization or bulk
upload via csv file.
Working with Users
If you set up your users, the system displays the user's name on the RealView
page for your active conferences.
The system displays the following information related to the users:
A system-generated number for the user

The name of the user, with a link to edit the user's personal information

A check box to delete the user

The previous, next, and page numbers at the bottom allow you to navigate to
different pages in the list of users.
Figure 1-5 Users
Deleting a User
To remove a user or users, check the box next to the user(s) in the Select
column on the right. Then click the Delete button at the top of the column.
There will be a confirmation message to confirm the deletion.
RGA Application Gateway Conference User Guide
SV8100