Vega VEGABAR 52 Operating Instructions Manual page 41

Optional settings
VEGABAR 52 • 4 ... 20 mA/HART
6 Set up with the indicating and adjustment module PLICSCOM
Factory setting
Like basic adjustment, in addition, special parameters are reset to
default values.
8)
Peak value
The min. and max. temperature or pressure values are each reset to
the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
Special parameters are parameters which are set customer-specifically on
8)
the service level with the adjustment software PACTware.
41