INVENTOR R2FO-50 User Manual page 15

Operation of Remote Controller
15
MODE icon:
If MODE button is pressed,
current operation mode icon
(AUTO),
(DRY), (FAN) or
only for heat pump models) will show.
16
LOCK icon:
is displayed by pressing "+"
and "-" buttons simultaneously. Press
them again to clear the display.
17
LIGHT icon:
is displayed by pressing the
LIGHT button. Press LIGHT button
again to clear the display.
SLEEP icon :
18
is displayed by pressing
the SLEEP button. Press this
button again to clear the display.
TEMP icon:
19
Pressing TEMP button,
(set temperature),
ambient temperature)
(outdoor ambient temperature)
and blank is displayed circularly.
15
16
17
18
( COOL),
(HEAT
(indoor
24
FAN AUTO
HEALTH
X-FAN
AIR
HUMIDITY
FILTER
TURBO
HOUR
ON/OFF
19 20
Up & down swing icon:
20
is displayed when pressing
the
up & down swing
Press this button again to clear the
display.
21
Left & right swing icon:
is displayed when pressing the
left & right swing
button again to clear the display.
SET TIME display:
22
After pressing TIMER button,
ON or OFF will blink.This area
will show the set time.
DIGITAL display:
23
This area will show the set tempe-
rature. In SAVE mode,"SE" will be
displayed. During defrosting opera-
tion, "H1" will be displayed.
FAN SPEED display:
24
Press FAN button to select the
desired fan speed setting(AUTO-
Low-Med-High).Your selection will
be displayed in the LCD windows,
except the AUTO fan speed.
13
23
22
21
button.
button.Press this