Instruction To Special Functions - INVENTOR R2FO-50 User Manual

Instruction to Special Functions

At the beginning of operation
In the end of operation
Notice:
1.Never manually adjust rise or drop of slide door.
2.The slide door will keep at current position once power failure.It will automatically
close after recovery of power.
3.If FC is displayed on the displayer, there will be malfunction with the slide door .It
will be cleared after restart of the unit. If FC shows once agian ,the unit should be
repaired.
4.If the unit is started under cooling mode for a period of time,there will be some water
drop on the slide door ,which is normal.
Operation and Notice for Slide Door
1.When indoor unit is on,the slide door will automatically move
downwards to inner side of front panel.
2.If slide door completely open, up & down swing louver will
begin to run and indoor fan will start.
1.When indoor unit is off,the up & down guide louver will swing
at specified location.
2.If up & down guide louver stops ,slide door will automaticaly
rise to close air outlet.
19