Installing The Spectralink Configuration Cradle - Polycom SpectraLink e340 Administration Manual

Wireless telephone configuration cradle

Table of Contents

Installing the SpectraLink

Configuration Cradle

PN: 1725-36036-001_E.doc

Set up the Configuration Cradle by first obtaining the appropriate

SpectraLink power supply for your country or region. Place the

Configuration Cradle on a flat, horizontal surface and plug the power

supply into the Configuration Cradle and into an appropriate wall

outlet. Plug a straight-through serial cable into the Configuration

Cradle and into an available serial port on the PC.

Set up a folder for Wireless Telephone configuration on the PC and

download the programming software from the Polycom website

http://www.polycom.com/usa/en/support/voice/wi-

fi/dual_charging_stand.html

files from the zip and run the

Note that there is no installer or uninstaller since the program does

not modify your system or registry. It runs from its current location

and stores its settings locally.

Serial port settings are handled automatically by the Configuration

Cradle software. If necessary, the COM port the Cradle is using can be

set in the

menu.

Settings

USB Serial Adapters: Some adapters are incompatible with the

Configuration Cradle. Of the adapters tested by Polycom

engineering, two have been found to work:

•

Sakar International IConcepts Item #60448

•

Keyspan USA-19HS

into this folder. Extract the individual

file.

PhoneConfig.exe

Table of Contents