Copy Settings - Polycom SpectraLink e340 Administration Manual

PN: 1725-36036-001_E.doc

Copy settings

The arrows and checkboxes allow you to copy between
Copy settings
the column and the
Phone settings
check boxes allow you to copy just the settings you require.
Usr
Upload/download and indicators
When the and
Read Phone
the transfer of configuration data from or to the handset in the Cradle.
The handset indicators change color to indicate the state of the
transfer. See below for indicator color significance. The
will halt the transfer.
The and windows display the serial number and MAC
Serial MAC
address of the handset in the Cradle. This information is not stored.
The four labeled flags on the right indicate the status of the
configuration transfer:
: green when attempting communication with handset in Cradle.
Active
Turns yellow if a timeout occurs (may be due to an improperly seated
handset). The software will repeatedly re-attempt communication
after a timeout so re-seating the handset should correct the problem.
: green when information is currently being read from the
Read
handset in the Cradle.
: yellow when information is currently being written to the
Write
handset in the Cradle.
: red when an error has occurred. An error message will appear
Error
on the status bar at the bottom of the main window.
Configuration Cradle Window
Editable settings
buttons are clicked, they initiate
Write Phone
column. The
Sys Grp
button
Stop
15