Table of Contents
Advertisement
Camera Diagrams
Camera
1. 12V DC Power Port
Connect the supplied DC power adaptor and cord.
2. CVBS Video Output
3. Audio Input(Not Activated)
4. Audio Output(Not Activated)
5. RS232 Control Port
RJ45 to RS232 extension cable is provided.
6. RS-422 Control Port
RJ45 to RS422 extension cable is provided.
7. RJ45 Port for HDBaseT signal output(Not Activated)
8. IP Network RJ45 Port(Not Activated)
9. HDMI Port
HDMI 1.4
10. SDI Port
3G-SDI
11. Power LED Indicator
Turns green when the camera is connected to power outlet. When the power is turned on, it takes about 15 to 30
seconds to display the image after LED turns on.
12. Built-in Mic
13. IR Remote Controller Sensors
These are sensors to receive commands from infrared remote controller
14. Lens
This is a 20X/30X magnification optical zoom lens.
15. Communication LED Indicator
Flashes blue when the camera receives commands from the infrared remote controller.
16. Fix mounting holes
For original wall/ceiling mount bracket
17. Tripod mounting holes
18. Bottom DIP Switch
7
Advertisement
Table of Contents
