Camera Diagrams; Camera - Bolin Technology VCC-8-4K20S-3SMB User Manual

Camera Diagrams

Camera

1. 12V DC Power Port
Connect the supplied DC power adaptor and cord.
2. CVBS Video output
3. 3.5mm Audio Input
4. RS-422/485 Control Port
RJ45 to RS422 extension cable is provided. (For more detail of extension cable see page15)
5. RS-232 Control Port
RJ45 to RS232 extension cable is provided. (For more detail of extension cable see page15)
6. RJ45 Port for HDBaseT signal output
7. Reset Button
Reset the image resolution to default setting (1080P59.94).
8. HDMI Port
HDMI 1.4b
9. SDI Port
3G-SDI
10. Power LED Indicator
Turns green when the camera is connected to power outlet. When the power is turned on, it takes about 15 to 30
seconds to display the image after LED turns on.
11. Built-in Mic
12. IR Remote Controller Sensors
These are sensors to receive commands from infrared remote controller.
13. Lens
This is a 20X magnification optical zoom lens.
Remove the lens protection plastic before first use.
14. Communication LED Indicator
Flashes blue when the camera receives commands from the infrared remote controller.
15. Fix mounting holes
For original wall/ceiling mount bracket
16. Tripod mounting holes
17. Bottom DIP Switch
7