Danfoss ECL Comfort 310 Operating Manual page 66

Operating Guide ECL Comfort 310, application A333
3.4 Monitoring temperatures and system components
This section describes the function in general for the ECL Comfort
210 / 296 / 310 series. The shown displays are typical and not
application related. They might differ from the displays in your
application.
Heating circuit
The overview display in the heating circuit ensures a quick
overview of the actual and (desired) temperatures as well as the
actual state of the system components.
Display example:
49 °C Flow temperature
(31) Desired flow temperature
24 °C Return temperature
(50)
Return temperature limitation
Input overview
Another option to get a quick overview of measured temperatures
is the 'Input overview' which is visible in the common controller
settings (how to enter the common controller settings, see
'Introduction to common controller settings' . )
As this overview (see display example) only states the measured
actual temperatures, it is read-only.
66 | © Danfoss | 2017.09
VI.GU.T2.02