Danfoss ECL Comfort 310 Operating Manual page 146

Operating Guide ECL Comfort 310, application A333
The ECL menus are as described for the ECL controller.
Most of the settings done directly in the ECL controller can be done
via the ECA 30 / 31 too.
146 | © Danfoss | 2017.09
All settings can be seen even if the application key is not inserted in
the ECL controller.
For changing settings, the application key must be inserted.
The Key overview (MENU > 'Common controller settings' > 'Key
functions') does not show the applications of the key.
The ECA 30 / 31 will display this information (an X on the ECA 30 / 31
symbol) if the application in the ECL controller does not comply with
the ECA 30 / 31:
In the example 1.10 is current version and 1.42 is desired version.
Display part of ECA 30 / 31:
This display indicates that an application has not been uploaded or the
communication to the ECL controller (master) is not working properly.
An X on the ECL controller symbol indicates wrong setup of
communication addresses.
Display part of ECA 30 / 31:
Newer versions of ECA 30 / 31 indicate the address number of the
connected ECL Comfort controller.
Address number can be changed in the ECA MENU.
A stand-alone ECL Controller has the address 15.
VI.GU.T2.02