Danfoss ECL Comfort 310 Operating Manual page 120

Operating Guide ECL Comfort 310, application A333
MENU > Settings > Flow meter
Pulse (A333.2 / A333.3)
Circuit
1
Choice of flow meter type.
Setting of the value of each pulse from the flow meter. This parameter is used
when the flow meter is connected to the "Pulse 2" on the ECA 32 module.
OFF:
Flow signal comes from an analogue meter or an M-bus
connected meter.
1 - 9999:
Setting of the value of each pulse from the flow meter.
MENU > Settings > Flow meter
Units (A333.2 / A333.3)
Circuit
1
Setting of desired unit for the read-out of actual flow.
120 | © Danfoss | 2017.09
Setting range Factory setting
OFF / 1 . . . 9999 l
Factory setting
Setting range
l/h / m 3 /h
17114
OFF
17115
l/h
VI.GU.T2.02