Safety Messages; Section 6 Safety Messages - Emerson Rosemount 3308 Reference Manual

Reference Manual
00809-XXXX-4811, Rev AA
February 2012
Section 6

SAFETY MESSAGES

www.rosemount.com
PRELIMINARY
Operation and Maintenance
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6-1
LCD Screen Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6-2
Display Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6-3
Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6-8
Power Module Replacement . . . . . . . . . . . . . . . . . . . . . . . page 6-10
Instructions and procedures in this section may require special precautions to
ensure the safety of the personnel performing the operations. Information that
potentially raises safety issues is indicated by a warning symbol ( ). Please
refer to the following safety messages before performing an operation
preceded by this symbol.
Failure to follow safe installation and servicing guidelines could result in death or
serious injury:
Make sure only qualified personnel perform the installation.
Use the equipment only as specified in this manual. Failure to do so may impair the
protection provided by the equipment.
Do not perform any service other than those contained in this manual unless you are
qualified.
Explosions could result in death or serious injury:
Installation of this transmitter in an explosive environment must be in accordance with
the appropriate local, national, and international standards, codes, and practices.
Please review the Product Certifications section for any restrictions associated with a
safe installation.
• Before connecting a Field Communicator in an explosive atmosphere, ensure
the instruments are installed in accordance with intrinsically safe or
non-incendive field wiring practices.
• In an Explosion-proof/Flameproof installation, do not remove the transmitter
cover when power is applied to the unit.
Process leaks may cause harm or result in death:
• Do not remove the transmitter while in operation
• Install device prior to process start-up
Electrical shock could cause death or serious injury:
• Avoid contact with the leads and terminals. High voltage that may be present
on leads can cause electrical shock.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions: This device may not cause harmful interference. This device must accept
any interference received, including interference that may cause undesired operation.
This device must be installed to ensure a minimum antenna separation distance of 20
cm (8 in.) from all persons.
Rosemount 3308