Table of Contents
Advertisement
Reference Manual
00809-0200-7062
3
Mechanical installation
3.1
Safety messages
Instructions and procedures in this section may require special precautions to ensure
the safety of the personnel performing the operations. Information that potentially raises
safety issues is indicated by a warning symbol (
before performing an operation preceded by this symbol.
WARNING
Failure to follow safe installation and servicing guidelines could result in death or
serious injury.
Ensure the transmitter is installed by qualified personnel and in accordance with applicable
code of practice.
Inspection and maintenance of this equipment shall be carried out by suitably trained
personnel, in accordance with the applicable standards and code of practice.
Use the equipment only as specified in this manual. Failure to do so may impair the
protection provided by the equipment.
Repair, e.g. substitution of components, etc. may jeopardize safety and is under no
circumstances allowed.
WARNING
Explosions could result in death or serious injury.
To prevent ignition of flammable or combustible atmospheres, disconnect power before
servicing.
Before connecting a handheld communicator in an explosive atmosphere, ensure that the
instruments are installed in accordance with intrinsically safe or non-incendive field wiring
practices.
WARNING
Process leaks could result in death or serious injury.
Handle the transmitter carefully.
Install and tighten process connectors before applying pressure.
Do not attempt to loosen or remove process connectors while the transmitter is in service.
3.2
Installation considerations
Before installing the transmitter, follow recommendations for mounting position, sufficient
free space, nozzle requirements, etc.
Reference Manual
Mechanical installation
). Refer to the following safety messages
March 2023
15
Advertisement
Table of Contents
Troubleshooting
