Safety Messages; Warnings; Section 3 Safety Messages - Emerson Rosemount 3308 Reference Manual

Reference Manual
00809-XXXX-4811, Rev AA
February 2012
Section 3

SAFETY MESSAGES

Warnings

www.rosemount.com
PRELIMINARY
Wireless Configuration
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
Wireless Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2
Power Module Installation . . . . . . . . . . . . . . . . . . . . . . . . . page 3-5
Device Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-6
Device Network Configuration . . . . . . . . . . . . . . . . . . . . . page 3-6
Remove Power Module . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-7
Instructions and procedures in this section may require special precautions to
ensure the safety of the personnel performing the operations. Information that
potentially raises safety issues is indicated by a warning symbol ( ). Please
refer to the following safety messages before performing an operation
preceded by this symbol.
Failure to follow these installation guidelines could result in death or serious
injury:
• Only qualified personnel should perform the installation
Explosions could result in death or serious injury:
Installation of this transmitter in an explosive environment must be in accordance with
the appropriate local, national, and international standards, codes, and practices.
Please review the Product Certifications section for any restrictions associated with a
safe installation.
• Before connecting a Field Communicator in an explosive atmosphere, make
sure that the instruments are installed in accordance with intrinsically safe or
non-incendive field wiring practices
Process leaks may cause harm or result in death:
• Do not remove the transmitter while in operation
• Install the transmitter prior to process start-up
Electrical shock could cause death or serious injury:
• Avoid contact with the leads and terminals. High voltage that may be present
on leads can cause electrical shock
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions: This device may not cause harmful interference. This device must
accept any interference received, including interference that may cause undesired
operation. This device must be installed to ensure a minimum antenna separation
distance of 20 cm (8 in.) from all persons.
Probe Connection; warnings associated with probe connections
Rosemount 3308