Factory Options - Motorola MINITOR III User Manual

External Speaker Jack
When the alert monitor is used in high-noise
environments or when privacy is needed, an
optional Motorola approved lapel speaker or
earpiece can be connected to the external
accessory jack located on the top control
panel. The jack is fitted with a protective plug.
To prevent entry of dust and mois-
ture, the plug should be inserted
whenever the external accessory
jack is not being used.
Belt Clip Feature
An integral part of the clip on the back of your
monitor is a security hook. This hook is
intended to allow easy removal of the alert
monitor, while at the same time preventing the
unit from being pulled off your belt.
Scan (Two-Frequency Models Only)
All alert monitors that are equipped with two
frequencies are capable of scanning the two
channels for selective call or monitoring pur-
poses. The scan feature may be programmed
for either priority scan or non-priority scan.
This feature is factory installed as priority
scan. Non-priority scan is field programmable.

FACTORY OPTIONS

The options that are described in the para-
graphs that follow are limited to those options
that affect the operation and/or functional
characteristics of your alert monitor. For a
complete list of available options, contact your
Motorola sales representative or authorized
paging system dealer.
NOTE
6