Krups KP 5000 Service Manual page 62

Assembly information
The new extraction head is equipped with a T­connection and the hot water pressure
hose.
1. Cut off new cold water pressure hoses from spare silicone tube.
2. Lead new pressure hoses through rubber bushings and connect them.
Always use new clips for pressure hose assembly.
3. Press extraction head onto centerpart till all 4 latches engage.
4. Screw down extraction head tightly.
5. Route wires to main PCB according to machine version.
R E P A I R
Wrong wire routing
can cause malfunc-
tions.