Replacing Pump - Krups KP 5000 Service Manual

Depending on sup-
plier, the body of
the pump can have 3 dif-
ferent colors.
The pressure hose
and clip have to be
discarded together with
the defect pump.
R E P A I R
Replacing pump
1. Remove housing left and spacer left first.
2. Unplug flat receptacle (S) from pump (T).
3. Unplug pump wire (U) from main pcb.
The flat receptacles have a special connector latching.
Press down lever at first, then pull receptacle.
4. Remove silicone elbow (V) from pump.
5. Remove pressure hose (W) with clip from T­piece of extraction head.
Always use new clips for pressure hose assembly.