Removing Housing Front - Krups KP 5000 Service Manual

Risk of damage if
cable plug is not
disconnected.
The water tank
connector and the
cup lighting can be
replaced now with this
partial disassembly.
R E P A I R
Removing housing front
4. Disconnect cable plug (E) of cup lighting on front of machine (two different wiring
versions depending on manufacturing date).
5. At the back of machine:
Push housing front (F) to the front with your thumbs. In case of problems open 2
latches on each side of housing front (F) with the help of a screwdriver.
6. Push in housing front at the top to loosen remaining latch.
7. Remove housing front.