Non-observance
can lead to injuries
and damages!
A pin-torx screw
head looks like this:
R E P A I R
R E P A I R
This chapter contains special security and assembling notes.
Tools and repair accessories
With the following tools, all described repair work can be done:
Tool
Torx screwdriver for security screws, PinTX 10 Housing back screw connections
Torx screwdriver for TX 30
Phillips screwdriver no. 1 and 2
Screwdriver with 4 mm width
Pointed pliers
Flat nose pliers
Fork wrench no. 8
Fork wrench no. 12
Cutter (stanley knife)
Small hammer
Piercer
Heat conducting paste
Repair work without disassembling the machine
Without disassembling the machine, the following parts can be replaced:
•
water tank
•
capsule holder
•
injector plate
•
drip tray and drip grid
•
capsule bin with bin grid
Application
Thermoblock screw connection
Main PCB screw connection
Open latches and snap connections
NTC temperature sensor
Flat receptacles, hose clips, filter element of
water tank connector
Adjustable pump connector
Pressure hoses
Clamp spring (NTC temperature sensor)
Clamp spring (NTC temperature sensor)
NTC temperature sensor