System Warnings And Cautions; Removing And Replacing A Drive Blank; Removing And Replacing An Sff Drive - HP ProLiant XL450 Gen10 Maintenance And Service Manual

System warnings and cautions

Before installing a server, be sure that you understand the following warnings and cautions.
WARNING:
To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed against it.
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the server.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.

Removing and replacing a drive blank

Remove the component as indicated.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all device bays
are populated with either a component or a blank.
To replace the blank, slide the blank into the bay until it locks into place.

Removing and replacing an SFF drive

Procedure
1. Determine the status of the drive from the drive LED definitions.
1
2
System warnings and cautions 25