Low/high beam light bulb
•
Pull out the electrical connection to the bulb (4), and disconnect it from the
bulb.
•
Move hood (5) manually.
•
Release the two ends of the retaining spring (6) located on the bulb holder.
•
Pull the bulb (1) out of its seat.
•
Install a bulb of the same type adequately.
NOTE
INSERT THE BULB INTO THE BULB HOLDER, MAKING SURE THE REFERENCE
04_26
FITTINGS MATCH.
Daytime running light bulb
•
Pull out the tail light bulb holder (7) from its seat.
•
Remove the bulb (2) and replace it with another of the same type.
•
Check the proper insertion of the bulb in the bulb holder.
04_27
Headlight adjustment (04_28, 04_29, 04_30, 04_31)
NOTE
IN COMPLIANCE WITH LOCAL LEGAL REQUIREMENTS, SPECIFIC PROCE-
DURES MUST BE FOLLOWED WHEN CHECKING LIGHT BEAM ADJUSTMENT.
111