MOTO GUZZI V7 III Special Manual page 42

Gear Shift "gear shift indicator threshold"
The gear shift indicator threshold is set in this mode.
Press and hold down the "MODE" button to access the setting mode from the menu.
Press the "MODE" button to select the required setting.
•
SET GEAR SHIFT L: 4,500 rpm (run-in revolutions)
•
SET GEAR SHIFT H: 8,000 rpm
Within the selected setting, each time the "MODE" button is pressed, the value is
increased by 100 rpm. When the maximum value is reached, the display goes back
to the initial value the next time the button is pressed. Press and hold down the
02_36
"MODE" button to save the value set, exit the mode and return to the configuration
menu.
At the first key-on after setting, the instrument panel applies the last value set. When
the engine speed threshold set is exceeded, the message "GEAR SHIFT" is shown
on the display and the general alarm warning lamp lights. The general alarm warning
lamp flashes when the lower threshold value is exceeded, and lights steadily when
the upper threshold is exceeded. The general alarm warning lamp extinguishes once
the engine speed drops below the threshold set.
The ECU limits the number of maximum engine revs to 7200 rpm.
02_37
02_38
42