Passing button (02_44)
Uses the high beam flash in case of danger or emergency.
Releasing the switch deactivates the high beam flash.
02_44
Start-up button (02_45)
•
Press the button and the starter motor spins the engine.
•
After starting the engine, hold down (3 seconds) to activate/deactivate the
MGCT control system. By pressing and quickly releasing, you can change
the MGCT control level.
NOTE
TO REPEAT THE ACTIVATION/DEACTIVATION OF MGCT CONTROL SYSTEM,
WAIT TWO SECONDS AND PRESS THE STARTER BUTTON AGAIN
02_45
47