The Saddle; Saddle - MOTO GUZZI V7 III Special Manual

Hide thumbs Also See for V7 III Special:
Table of Contents

Advertisement

• Accelerate to a constant speed of 30 km/h (18.64 mph) in second gear, and maintain
this speed for at least 8 seconds.
• The end of the procedure will be indicated by the MGCT warning light (2) turning off.
The MGCT system is active.
• Once the procedure is completed, it is necessary to switch the ignition key to (OFF)
and wait for at least 60 seconds before being able to switch again to (ON).
• In case of failure to complete the procedure within 2 minutes, the MGCT warning
light (2) will stay on steady and the MGCT system will remain off until switching to
(OFF).
• To reactivate the MGCT system, it must be switched again to (ON). It is however
necessary to repeat the process until it succeeds.
CAUTION
IF NECESSARY, CONTACT AN AUTHORISED SERVICE CENTRE.
Characteristic
Distance between tone wheel and front sensor
0.3 - 2.00 mm (0.012 - 0.079 in)
Distance between tone wheel and rear sensor
0.3 - 2.00 mm (0.012 - 0.079 in)

The saddle (02_53, 02_54)

(RACER)
56

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V7 III Special and is the answer not in the manual?

This manual is also suitable for:

V7 iii stoneV7 iii racer

Table of Contents

Save PDF