Table of Contents
Advertisement
CAUTION
A POOR STATE OF MAINTENANCE OF THE TYRES (PRESSURE TOO LOW OR
FLAT TYRES/WEAR) CAN RESULT IN ABNORMAL OPERATION OF THE MGCT
SYSTEM.
IN CASE OF REPEATED INTERVENTIONS OF THE MGCT SYSTEM, EVEN ON
ROAD SURFACES WITH GOOD GRIP OR SMALL THROTTLE OPENINGS, IT IS
NECESSARY TO CHECK FOR WEAR AND/OR THE STATE OF INFLATION OF
TYRES FIRST. IF THE PROBLEM PERSISTS, DEACTIVATE THE MGCT SYSTEM
AND CONTACT AN AUTHORIZED SERVICE CENTRE.
CAUTION
IN THE EVENT OF MALFUNCTION OF THE BATTERY, THE ABS - MGCT SYSTEM
TURNS OFF.
MGCT SYSTEM CALIBRATION PROCEDURE
In order to maintain the effectiveness of the MGCT system following the replacement
of one or both tyres or in the case of serious wear, causing a non-compliant behaviour
of the MGCT, a calibration procedure of the system must be performed as follows on
a straight flat stretch of road.
Check that the tyres are inflated to the correct pressure before calibrating the
MGCT system.
• Allow the engine to idle for at least 5 seconds.
• Check that the MGCT is activated at level 1 or 2. Otherwise, activate it.
02_52
• Pull the clutch lever while pressing the starter button (3) for at least 5 seconds. The
activation of the process will be confirmed by the MGCT warning light (2) turning on
with fast flashing.
55
Advertisement
Table of Contents
