Table of Contents
Advertisement
CAUTION
HOT OIL IS MORE FLUID AND WILL DRAIN OUT MORE EASILY AND COM-
PLETELY; IDEAL TEMPERATURE IS REACHED AFTER THE ENGINE HAS RUN
FOR ABOUT TWENTY MINUTES.
OIL BECOMES VERY HOT WHEN THE ENGINE IS HOT; BE CAREFUL NOT TO
GET BURNED WHEN CARRYING OUT THE OPERATIONS DESCRIBED BELOW.
•
Place a recipient with a capacity of at least 2,000 cm³ (122.05 cu.in) under
the drain plug (1).
•
Unscrew and remove the drainage plug (1).
•
Drain the oil into the container; allow several minutes for oil to drain out com-
pletely.
•
Check and if necessary, replace the sealing washer of drainage plug (1).
•
Remove any metal deposits attached to the drainage plug (1) magnet.
•
Screw and tighten the drainage plug (1).
Tightening torque for drainage plugs (1): 20 - 22 Nm (14.75 - 16.23 lb ft).
04_03
DO NOT DISPOSE OF OIL INTO THE ENVIRONMENT.
DISPOSE OF ENGINE OIL IN A SEALED CONTAINER AND TAKE IT TO YOUR
SUPPLIER OR TO THE NEAREST USED OIL COLLECTION CENTRE.
Engine oil filter replacement
CAUTION
REPLACE THE ENGINE OIL FILTER EVERY 10,000 KM (6,213.71 MILES) (OR
EACH TIME YOU CHANGE THE ENGINE OIL).
95
Advertisement
Table of Contents
