Bevel Gear Pair Oil Level - MOTO GUZZI V7 III Special Manual

•
Undo the two screws (2) and remove the cover (3).
•
Remove the engine oil filter (5).
NOTE
NEVER REUSE AN OLD FILTER.
04_04
•
Spread a thin layer of oil on the sealing ring (4) of the new engine oil filter.
•
Fit the new engine oil filter with the spring facing downwards.
•
Refit the cover (3), screw and tighten the screw (2).

Bevel gear pair oil level (04_05, 04_06)

Check the cardan shaft oil level regularly; change the oil at the specified intervals
according to the scheduled maintenance table
To check:
•
Keep the vehicle upright with both wheels on the ground.
•
Unscrew and remove the level plug.
•
Check that the oil level is on the rim of the hole of the level plug. Top-up if oil
is below the specified level.
04_05
CAUTION
CHECK THE CONDITION OF THE SEALING WASHER OF THE LEVEL PLUG IN
CASE OF CHECK OF THE OIL IN THE CARDAN SHAFT TRANSMISSION UNIT.
IT IS ALSO RECOMMENDED TO REPLACE SUCH WASHER AT AN AUTHOR-
ISED Moto Guzzi Dealer.
96