Headlight adjustment (04_22, 04_23)
NOTE
IN COMPLIANCE WITH LOCAL LEGAL REQUIREMENTS, SPECIFIC PROCE-
DURES MUST BE FOLLOWED WHEN CHECKING LIGHT BEAM ADJUSTMENT.
For a quick check of the correct direction of the front light beam:
•
Place the vehicle 10 m (32.8 ft) from a vertical wall and make sure the ground
is level.
•
Turn on the low beam light, sit on the vehicle and check that the light beam
projected to the wall is a little below the headlight horizontal straight line
(about 9/10 of the total height).
04_22
To carry out vertical adjustment of the light beam:
•
Stand the motorcycle in a vertical position.
•
Loosen the headlight (2) fixing screws (1) on the upper part from both sides
04_23
•
Loosen the headlight fixing screws (3) on the lower part.
•
Then turn the headlight until the beam is at the desired position:
95