Table of Contents
Advertisement
BASIC CONFIGURATION
All manuals and user guides at all-guides.com
The SB3500 contains all necessary software. You don't need to configure the
SB3500, but you must configure your computer for TCP/IP and check for an
IP address. Your service provider may provide additional instructions for
setting up your computer. The following basic instructions are for
Windows™ 95 or Windows 98. If you are using a different operating system,
refer to that user guide.
Configuring for TCP/IP
1
On the Windows Desktop, click Start.
2
Select Settings and then Control Panel from the pop-up menus.
3
Double-click the Network icon on the Control Panel window.
4
Select the Configuration tab on the Network window.
5
Check to see if TCP/IP has been installed for the Ethernet card. If
TCP/IP appears in the list of network components, it is installed and
you can proceed to step 10. If it doesn't appear on the list, continue
with step 6.
1 5
Advertisement
Table of Contents
