Wpa2 - ZyXEL Communications EMG6765-Q10A User Manual

Table 20 Network > Wireless LAN 2.4G/5G > General: WPA2-PSK (continued)
LABEL
Group Key Update
Timer
Apply
Cancel

9.3.3 WPA2

Select WPA2 from the Security Mode list.
Note: WPA2 is not available if you enable WPS before you configure WPA2 in the Wireless LAN
2.4G/5G > General screen.
Figure 36 Network > Wireless LAN 2.4G/5G > General: WPA2
Chapter 9 Wireless LAN
DESCRIPTION
The Group Key Update Timer is the rate at which the AP sends a new group key out to all
clients.
The default is 3600 seconds (60 minutes).
Click Apply to save your changes back to the EMG6765-Q10A.
Click Cancel to reload the previous configuration for this screen.
EMG6765-Q10A User's Guide
80