Push Button Configuration (Pbc) - ZyXEL Communications EMG6765-Q10A User Manual

• Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See
Section 6.3.1 on page
• PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal
Identification Number) in the EMG6765-Q10A's interface. See
more secure method, since one device can authenticate the other.

6.3.1 Push Button Configuration (PBC)

Make sure that your EMG6765-Q10A is turned on and that it is within range of your computer.
1
Push and hold the WPS button located on the EMG6765-Q10A's side panel for more than 1 second.
2
Alternatively, you may log into EMG6765-Q10A's web configurator and go to the Configuration >
Network > Wireless LAN 2.4G or 5G > WPS screen. Enable the WPS function and click Apply. WPS is
enabled by default on the EMG6765-Q10A.
Then go to the Configuration > Network > Wireless LAN 2.4G or 5G > WPS Station screen and click the
3
Push button.
Note: Your EMG6765-Q10A has a WPS button located on the side of the device as well as a
WPS button in its web configurator. Both buttons have exactly the same function: you
can use one or the other.
Chapter 6 Tutorials
38. This is the easier method.
2
EMG6765-Q10A User's Guide
38
Section 6.3.2 on page
1
39. This is the