Table of Contents
Advertisement
Go to your phone settings and turn on Wi-Fi. Open the Wi-Fi networks and tap WPS Push Button or the
4
WPS icon
(Section 3 on page
Note: It doesn't matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The EMG6765-Q10A sends the proper configuration settings to the wireless client. This may take up to
two minutes. The wireless client is then able to communicate with the EMG6765-Q10A securely.
The following figure shows you an example of how to set up a wireless network and its security by
pressing a button on both EMG6765-Q10A and wireless client (the Android 4.4.2 phone in this example).
Figure 16 Example WPS Process: PBC Method
Wireless Client
6.3.2 PIN Configuration
When you use the PIN configuration method, you need to check the client's PIN number and use the
EMG6765-Q10A's configuration interface.
Go to your phone settings and turn on Wi-Fi. Open the Wi-Fi networks list and tap WPS PIN Entry to get a
1
PIN number.
Then go to Configuration > Network > Wireless LAN 2.4G or 5G > WPS Station screen. Enter the client's PIN
2
number to the PIN field. Click the Start button (or button next to the PIN field) on the EMG6765-Q10A WPS
Station screen within two minutes.
Chapter 6 Tutorials
14).
WITHIN 2 MINUTES
SECURITY INFO
COMMUNICATION
EMG6765-Q10A User's Guide
39
AP
Press and hold
for more than
1 second
Advertisement
Table of Contents
