Table of Contents
Advertisement
2.1 Overview
This chapter describes how to access the EMG6765-Q10A Web Configurator and provides an overview
of its screens.
The Web Configurator is an HTML-based management interface that allows easy setup and
management of the EMG6765-Q10A via Internet browser. Use Internet Explorer 9.0 and later versions,
Mozilla Firefox 21 and later versions, Safari 6.0 and later versions or Google Chrome 26.0 and later
versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter
are allowed in Internet Explorer.
2.2 Login Accounts
With the admin account, you cannot access Remote MGMT screens and can only view the Sys OP
Mode screen. The default user name is "admin" and password is the back-label default key.
2.3 Accessing the Web Configurator
Make sure your EMG6765-Q10A hardware is properly connected and prepare your computer or
1
computer network to connect to the EMG6765-Q10A (refer to the Quick Start Guide).
Launch your web browser.
2
The EMG6765-Q10A is in router mode by default. Type "http://192.168.1.1" as the website address.
3
If the EMG6765-Q10A is in access point, the IP address is 192.168.1.2. See
information about the modes of the EMG6765-Q10A.
Introducing the Web
(Chapter 26 on page
EMG6765-Q10A User's Guide
18
C
H A P T E R
Configurator
184) to see how to make sure these functions
Chapter 3 on page 21
2
for more
Advertisement
Table of Contents
