ZyXEL Communications EMG6765-Q10A User Manual page 91

Use airtime management to allocate a percentage of available airtime to active SSID profiles in the
EMG6765-Q10A. You can also allocate airtime to hosts connected to the network. To open this screen,
click Network > Wireless LAN 2.4G/5G > Airtime Management.
Figure 46 Network > Wireless LAN 2.4G/5G > Airtime Management
The following table describes the labels in this screen.
Table 30 Network > Wireless LAN 2.4G/5G > Airtime Management
LABEL
Airtime Management
Airtime Management WiFi
Interface Setup
#
Status
SSID
Configure Method
Percentage
Airtime Management WiFi
Station Setup
SSID Select
Host Select
Chapter 9 Wireless LAN
DESCRIPTION
Select Enable to activate the airtime management feature. Click Disable to turn it
off.
Use this to allocate a specific amount of time for an SSID's transmissions.
This is the index number of each SSID profile.
This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
This field displays the name of the Wi-Fi network used in this SSID profile.
Select Manual to configure the percentage of airtime this SSID profile has. Otherwise
select Auto for the EMG6765-Q10A to assign it automatically.
Note: To allocate airtime, the SSID profile's status should be active in the
More AP screen.
Enter the percentage of time for the transmissions on this SSID profile.
Use this to allocate a specific amount of time for transmissions of a Wi-Fi station
connected to the EMG6765-Q10A.
Select the SSID the Wi-Fi station is connected to.
Select a Wi-Fi station to assign airtime.
EMG6765-Q10A User's Guide
91