Example Of Accessing Your Shared Files From A Computer; Use Windows Explorer To Share Files - ZyXEL Communications EMG6765-Q10A User Manual

Table 72 Management > USB Media Sharing > FTP (continued)
LABEL
User Accounts
#
Enable
User Name
Password
USB1/2
Upstream
Bandwidth
Downstream
Bandwidth
Apply
Cancel
23.8 Example of Accessing Your Shared Files From a
Computer
You can use Windows Explorer or FTP to access the USB storage devices connected to the EMG6765-
Q10A.
This example shows you how to use Microsoft's Windows XP to browse your shared files. Refer to your
operating system's documentation for how to browse your file structure.

23.8.1 Use Windows Explorer to Share Files

You should have enabled file sharing and create a user account (Bob/1234 for example) with read and
write access to USB 1 in the USB Media Sharing > SAMBA screen.
Open Windows Explorer to access the connected USB device using either Windows Explorer browser or
by browsing to your workgroup.
Chapter 23 USB Media Sharing
DESCRIPTION
Before you can share files you need a user account. Configure the following fields to set up
a file-sharing account.
This is the index number of the user account.
This field displays whether a user account is activated or not. Select the check box to
enable the account. Clear the check box to disable the account.
Enter a user name that will be allowed to access the shared files. You can enter up to 20
characters. Only letters and numbers allowed.
Enter the password used to access the shared files. You can enter up to 20 characters. Only
letters and numbers are allowed. The password is case sensitive.
Specify the user's access rights to the USB storage device which is connected to the
EMG6765-Q10A's USB port.
Read & Write - The user has read and write rights, meaning that the user can create and edit
the files on the connected USB device.
Read - The user has read rights only and can not create or edit the files on the connected
USB device.
None - The user cannot access the files on the USB device(s) connected to the USB port.
Enter the maximum bandwidth (in Kbps) allowed for incoming FTP traffic.
Enter the maximum bandwidth (in Kbps) allowed for outgoing FTP traffic.
Click Apply to save your changes back to the EMG6765-Q10A.
Click Cancel to begin configuring this screen afresh.
EMG6765-Q10A User's Guide
167