Advanced Settings- MPK General Settings
BLF Call-pick Prefix
Event List URI
Force BLF Call-pickup by
Prefix
Advanced - MPK LCD Settings
BLF List
Key Mode
Table 32: Advanced - MPK General Settings
Configures the prefix prepended to the BLF extension when the phone
picks up a call with BLF key. The default setting is ** for each account.
Configures the event list BLF URI on the phone to monitor the extensions
in the list with multi-purpose keys. The server side has to support this
feature. Users need to configure an event list BLF URI on the service
side first (i.e., BLF1006@myserver.com) with a list of extensions
included. On the phone, in this "event list BLF URI" field, fill in the URI
without the domain (i.e., BLF1006).
Uses the prefix for BLF Call-pickup. The default setting is "No".
Table 33: Advanced - MPK LCD Settings
Displays the configured MPK keys. Users could change the keys order
by selecting "Up", "Down", "Check All", or "Delete
Assigns a function to the Multi-Purpose Key in the MPK app
The key mode options are:
•
Speed Dial
Press to dial the extension configured in UserID field.
•
Busy Lamp Field (BLF)
Monitor the extension status as configured in UserID field.
•
Call Transfer
Transfer the current active call to the extension configured in UserID field.
•
Call Intercom
Intercom/paging to the extension configured in UserID field.
•
Speed Dial via Active Account
Similar to Speed Dial but it will dial based on the current active account.
For example, if the phone is off-hook and account 2 is active, it will call
the configured extension using account 2.
•
Dial DTMF
Dial the DTMF digits filled in UserID field during a call.
•
Call Park
Configure the call park feature code to park or pick up the call.
•
Multicast Paging
Configure the IP address and port for establish a multicast paging call.
•
Group Call
Set up to 6 numbers for an account to start a conference. Users need to
add the member numbers into a list.
GAC2500 Administration Guide
P a g e
| 57