Connection Configuration
GAC2500 provides 2 connection configurations:
•
Standard connection (extendable cascade connection and mobile device connection).
•
Integrated connection (slave mode connection).
Standard Connection
1. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router.
2. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used in step 1, this step could be skipped.
3. The LCD will display booting up or firmware upgrading information. Before continuing, please wait
for the main screen display to show up.
4. On the web configuration interface or from the menu of the touch screen, you can further configure
network connection using static IP, DHCP and etc.
Figure 2: Powering the GAC2500
GAC2500 Administration Guide
P a g e
| 18