UPGRADING AND PROVISIONING
GAC2500 supports software upgrade via TFTP /HTTP/HTTPS server. Please go to Maintenance
->Upgrade to configure. GAC2500 supports the following upgrade modes:
•
Manual upload firmware file to upgrade
•
Upgrade via TFTP firmware server
•
Upgrade via HTTP/HTTPS firmware server
Upgrade and Provisioning Configuration
There are two ways to setup upgrade and provisioning on GAC2500. They are Keypad Menu and Web GUI.
Configure via Keypad Menu
In GAC2500 Settings, select Advanced Settings->Upgrade. Users may then select the upgrade mode
and enter the IP address or FQDN for the Firmware server and the Config server. After making the changes,
tap Ok button to save the change. Then reboot the phone.
Configure via Web GUI
Open a web browser on PC and enter the IP address for the GAC2500. Then login with the administrator
username and password. Go to Maintenance section, select Upgrade tab. In the Upgrade web page, enter
the IP address or the FQDN for the upgrade server and choose to upgrade via TFTP, HTTP or HTTPS (The
default setting is HTTPS). Save and apply the changes, then reboot the phone.
Figure 11: GAC2500 Upgrade Configuration via LCD
GAC2500 Administration Guide
P a g e
| 72