Provisioning And Configuration File Download; Provision As Provision Server (Pnp); Table 46: Provision Server Settings; Figure 14: Provision Server Settings - Grandstream Networks GAC2500 Administration Manual

Audio conference phone for android
Hide thumbs Also See for GAC2500:
Table of Contents

Advertisement

Provisioning and Configuration File Download

Grandstream SIP Devices can be configured via the Web Interface as well as via a Configuration File
(binary or XML) through TFTP or HTTP/HTTPS. The "Config Server Path" is the TFTP, HTTP or HTTPS
server path for the configuration file. It needs to be set to a valid URL, either in FQDN or IP address format.
The "Config Server Path" can be the same or different from the "Firmware Server Path".
A configuration parameter is associated with each particular field in the web configuration page. A parameter
consists of a Capital letter P and 2 to 3 (Could be extended to 4 in the future) digit numeric numbers. i.e.,
P2 is associated with the "Admin Password" in the Web GUI->Maintenance->Security Settings page. For a
detailed parameter list, please refer to the corresponding firmware release configuration template in the
following link:
http://www.grandstream.com/support/tools
When the GAC2500 boots up, it will issue TFTP or HTTP request to download a configuration XML file
named "cfgxxxxxxxxxxxx" followed by "cfgxxxxxxxxxxxx.xml", where "xxxxxxxxxxxx" is the MAC address of
the phone, i.e., "cfg000b820102ab" and "cfg000b820102ab.xml". If downloading "cfgxxxxxxxxxxxx.xml" file
is not successful, the provision program will download a generic cfg.xml file. The configuration file name
should be in lower case letters. For more details on XML provisioning, please refer to the following document:
http://www.grandstream.com/sites/default/files/Resources/gs_provisioning_guide.pdf

Provision as Provision Server (PNP)

GAC2500 provides the Provision Server app for batch provision. The app setting is shown as follows:
Parameters
Description
Enables the PNP (Plug and Play) feature on the device. If it is enabled, the device
Provision Server
will be set as a provision server to send SIP NOTIFY message including the
provision URL to response the client phone's SIP SUBSCRIBE request. This

Figure 14: Provision Server Settings

Table 46: Provision Server Settings

GAC2500 Administration Guide
P a g e
| 75

Advertisement

Table of Contents
loading

Table of Contents