Start time
End time
Contacts - Schedule
Conference name
Members of conference
Recurring conference
Start date
End date
Conference date
Time zone
Start time
Conference duration (Min)
Remind time
Auto conference
Auto answer for conference
members
Block when enter
Block calls not from members
in schedule
Password
Auto record
Contacts - Call History
Users can browse all history calls, missed and intercepted records.
Contacts - LDAP
Connection Mode
Server Address
Port
Enter the start time of the block mode.
Enter the end time of the block mode.
Table 21: Contacts - Schedule
Enter a conference name.
Select members of conference.
Select in order to enable the conference repeat and how often to
repeat the conference from the drop-down list.
Select the conference start date.
Select whether to repeat the conference indefinitely or set an end
date.
If recurring conference is not selected, set the start date of the
conference.
Select the time zone.
Select the start time of the conference.
Select the conference duration in minutes.
Select to send a reminder before the conference start.
Select to enable auto conference.
Select to auto answer for conference members.
Select to block when enter.
Select to block call not incoming from members.
Enter the conference password.
Select to auto record.
Table 22: Contacts - LDAP
Select which protocol will be used for LDAP searching, LDAP or
LDAPS.
Configures the URI of the LDAP (Lightweight Directory Access
Protocol) server.
Configures the LDAP server port. The default LDAP port number is
GAC2500 Administration Guide
P a g e
| 36