Grandstream Networks GAC2500 Administration Manual page 60

Alternate DNS Server
Second Alternate DNS Server Configures secondary alternate DNS server.
Enable LLDP
LLDP TX Interval(s)
Layer 3 QoS for SIP
Layer 3 QoS for Audio
Layer 2 QoS 802.1Q/VLAN
Tag (Ethernet)
Layer 2 QoS 802.1p Priority
Value (Ethernet)
Layer 2 QoS 802.1Q/VLAN
Tag (Wi-Fi)
Layer 2 QoS 802.1p Priority
Value (Wi-Fi)
HTTP/HTTPS User-Agent
SIP User-Agent
802.1x mode
802.1x Identity
802.1x Secret
CA Certificate
Client Certificate
Private Key
HTTP/HTTPS Proxy
Configures alternate DNS server.
Enable / Disable LLDP.
Configures the interval the phone sends LLDP-MED packet, the default
setting is 30s.
Defines the Layer 3 QoS parameter for SIP packets. This value is used
for IP Precedence, Diff-Serv or MPLS.
Defines the Layer 3 QoS parameter for Audio packets. This value is used
for IP Precedence, Diff-Serv or MPLS.
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. The
default value is 0. Note: Please do not change the setting before
understanding the VLAN's settings, or the phone can't get the correct IP
address.
Assigns the priority value of the Layer2 QoS packets for LAN port. The
default value is 0.
Assigns the VLAN Tag of the Layer 2 QoS packets for Wi-Fi. The default
value is 0. Note: Please do not change the setting before understanding
the VLAN's settings, or the phone can't get the correct IP address.
Assigns the priority value of the Layer2 QoS packets for Wi-Fi. The
default value is 0.
This sets the user-agent for phonebook and screen saver
Sets the user-agent for SIP.
Enables and selects the 802.1x mode for the phone system. The
supported 802.1x modes are:
•
EAP-MD5
•
EAP-TLS
•
EAP-PEAP
The default setting is "Disable".
Enters the identity information for the selected 802.1x mode.
(This setting will be displayed only if 802.1 X mode is enabled).
Enters the secret for the 802.1x mode. This option will be appeared when
802.1x mode is EAP-MD5 or EAP-PEAP.
Uploads the CA Certificate file to the phone.(This setting will be displayed
only if the 802.1 X mode is enabled)
Loads the Client Certificate file to the phone. (This setting will be
displayed only if the 802.1 X TLS mode is enabled)
Loads the private key file to the phone. (This setting will be displayed only
if the 802.1 X TLS mode is enabled)
Specifies the HTTP/HTTPS proxy hostname for the phone to send
GAC2500 Administration Guide
P a g e | 59