Advanced Settings - Multicast Paging; Advanced Settings - Mpk General Settings - Grandstream Networks GAC2500 Administration Manual

Advanced Settings – Multicast Paging
This page will show only if Expert mode is enabled.
Table 31: Multicast Paging
Paging Barge
Paging Priority Active
Multicast Paging Codec
Multicast Listening
Advanced Settings – MPK General Settings
Table 32: Advanced – MPK General Settings
BLF Call-
Configures the prefix prepended to the BLF extension when the phone picks up a call with BLF key. The default
pick
setting is ** for each account.
Prefix
Configures the event list BLF URI on the phone to monitor the extensions in the list with multi-purpose keys.
Event List The server side has to support this feature. Users need to configure an event list BLF URI on the service side
URI first (i.e., BLF1006@myserver.com) with a list of extensions included. On the phone, in this "event list BLF URI"
field, fill in the URI without the domain (i.e., BLF1006).
Force BLF
Call-
Uses the prefix for BLF Call-pickup. The default setting is "No".
pickup by
Prefix
Sets the threshold of paging calls. If the paging call's priority is higher than the
threshold, the existing call will be hold and the paging call will be answered.
Otherwise, the existing call does not be affected. If it is set to Disable, any
paging call will not be answered. The default setting is "Disable".
Determines if a new paging call whose priority is higher than the existing paging
call will be answered. If it is checked, this feature will be enabled. The default
setting is disabled.
Selects the codec type for the multicast paging call. This list includes PCMU,
PCMA, G726-32, G722, and G729A/B.
Determines if a new paging call whose priority is higher
than the existing paging call will be answered. If it is
Priority
checked, this feature will be enabled. The default setting
is disabled
Configures the IP address and port number (valid port
range is 1- 65535) for monitoring multicast paging call.
When the initiator initiates a call, answer the call and
display listening address and tag of the monitoring target.
This feature supports Video Multicast, when the initiator
Listening
initiates Video Multicast, it will automatically add the
Address
number 2 on the port of the listening address. Reboot the
phone to make changes take effect. The valid IP address
ranges from 224.0.0.0 to 239.255.255.255. Users may
also fill the label for each listening address corresponding
to the priority.
Defines the label for each listening address corresponding
Label
to the priority.