Factory Reset
Maintenance - Recording
Call
Normal
Recording. The recording page lists the recordings from calls and normal recording. For each record, users
can rename, download, lock, and delete it. If the recording is locked, it cannot be deleted. Or users can
batch delete the recordings by checking multiple records and delete them.
Maintenance - Troubleshooting
Syslog
Syslog Server Address
Syslog Level
Send SIP Log
Logcat
Clear Log
Log Tag
Log Priority
value is "Yes".
It is used to reset the phone system to the default factory setting mode.
If the "Clear the SD card" is checked, the SD card storage mounted to
the phone will be format as well.
Table 39: Maintenance - Recording
Rename, download, and delete the recording that is saved in a call or a
conference.
Rename, download, and delete the recording that is saved in Recorder
app.
Table 40: Maintenance - Troubleshooting
Configures the URI which the phone system will send the syslog
messages to. The default setting is "log.ipvideotalk.com".
Selects the level of logging for syslog. The default setting is "None".
There are 4 levels from the dropdown list: DEBUG, INFO, WARNING
and ERROR. The following information will be included in the syslog
packet:
• DEBUG (Sent or received SIP message,)
• INFO (Product model/version on boot up, NAT related info, SIP
message summary, Inbound and outbound calls, Registration status
change, negotiated codec, Ethernet link up)
• WARNING (SLIC chip exception)
• ERROR (SLIC chip exception, Memory exception)
Configures whether the SIP log will be included in the syslog messages.
The default setting is "No".
Clears the log files saved in the phone system.
Configures the filter to display the specified process log file.
Selects the log priority to display. It can be selected from list below:
• Verbose (Default Setting)
• Debug
GAC2500 Administration Guide
P a g e
| 65