Grandstream Networks GAC2500 Administration Manual page 64

Firmware File Postfix
Use Grandstream GAPS
Config file Upgrade Via
Config Server Path
Config File HTTP/HTTPS
User Name
Config File HTTP/HTTPS
Password
Config File Prefix
Config File Postfix
XML Config File Password
Authenticate Conf File
Download Device
Configuration
Upload Device Configuration
Cust File Upgrade Via
Cust Config Server Path
Cust File HTTP/HTTPS User
Name
Cust File HTTP/HTTPS
configure.
This feature allows ITSP to load the firmware with specific postfix to the
phone. Only the firmware with the matching encrypted prefix/postfix will
be downloaded and flashed into the phone. This setting is for ITSP to
configure.
When checked GAPS server will be used for provisioning redirection.
Selects provisioning method: TFTP, HTTP or HTTPS. Default setting is
"HTTPS".
Sets IP address or domain name of configuration server. The server
hosts a copy of the configuration file to be installed on the GAC2500.
Default is fm.grandstream.com/gs.
If your HTTP/HTTPS config server has enabled user authentication
mode, please fill in user name for authentication.
If your HTTP/HTTPS config server has enabled user authentication
mode, please fill in password for authentication.
Checks if configuration files are with matching prefix before downloading
them. This field enables user to store different configuration files in one
directory on the provisioning server.
Checks if configuration files are with matching postfix before downloading
them. This field enables user to store different configuration files in one
directory on the provisioning server.
Decrypts XML configuration file when encrypted. The password used for
encrypting the XML configuration file is using OpenSSL.
Sets the phone system to authenticate the configuration file before
applying it. If it set to "Yes", the configuration file must include value P1
with phone system's administration password. If it is missed or does not
match the password, the phone system will not apply it. The default
setting is "No"
Click to download the device configuration file to PC.
Click to upload the configuration file on PC to device.
Selects download method: TFTP, HTTP or HTTPS. Default setting is
"HTTP".
Sets IP address or domain name of the GUI customization file server.
The server hosts a copy of the file to be installed on the phone. The
Default setting is fm.grandstream.com/gs.
Enters the username for the firmware HTTP/HTTPS server.
Enters the password for the firmware HTTP/HTTPS server.
GAC2500 Administration Guide
P a g e | 63