Table of Contents
Advertisement
Callee ID Display
Ringtones
Account Ring Tone
Ignore Alert-Info Header
Match Incoming Caller ID
Distinctive Ring Tone
Advanced Settings
Security Settings
Check Domain Certificates
Enabled Authentication Server
Validation
SIP CA Certificate
SIP User Certificate
Validate Incoming SIP Messages
Only Accept SIP Requests from Known
Servers
Asserted Identity Header, Remote-Party-
ID Header, and From Header in the
incoming SIP INVITE. When set to
"Disabled", all incoming calls are
displayed with "Unavailable". When set to
"From Header", use the Caller ID in From
Header. When set to "PAI Header", use the
Caller ID in PAI Header.
Default is Automatic.
If set to "Auto", if the Privacy header is
carried in 180 Ringing and the value is
"id", "Anonymous" will be displayed on
the GAC2570; otherwise, the GAC2570
will update the callee ID in the order of P-
Asserted Identity Header, Remote-Party-
ID Header, and To Header. If set to
"Disabled", the callee ID will be displayed
as "Unavailable". If set to "To Header",
the callee ID will not be updated and
displayed as To Header. Default is Auto.
Allows users to configure the ringtone for
the account. Users can choose different
ringtones from the dropdown list.
When enabled, the Device will ignore the
Alert-Info header and play the configured
default ringtone. Default is No.
Set the ringing rule for the incoming calls.
There are 3 spaces on the left to set the
ringing rule.
For example: 139x+ means that the
ringing bell corresponding to the incoming
call beginning with 139 is the ringtone on
the right.
This field specifies the distinctive ringtone
for the matching incoming caller ID on the
left. Users can choose from different
ringtones from the dropdown menu.
Sets the device to check the domain
certificates if TLS/TCP is used for SIP
Transport. The default setting is "No".
Validates CA certification when TLS/TCP
is configured for SIP.
Select the CA certificate for server
verification.
Press "Manage" to add / delete "Custom
CA" and list "Phone CA".
Select the user certificate to access the SIP
TLS authentication content required by
some specific servers. If the private key is
included, upload it with the user
certificate.
Press "Manage" to add/delete "User
Certificates".
Specifies if the device will check the
incoming SIP messages caller ID and
CSeq headers. If the message does not
include the headers, it will be rejected. The
default setting is "No".
Answers the SIP request from saved
servers when set to "Yes", only the SIP
requests from saved servers will be
Advertisement
Table of Contents
