Cloning Software Cs-Fr5100 - Icom IC-FR5100 Series Handbook

Getting started
oThis cloning software is designed to perform data
setting and cloning for the IC-FR5100/IC-FR6100
series VHF/UHF FM REPEATERS.
oHELP WINDOW: CS-FR5100 has a help window to
describe functions and operation.
System requirements
To use this program, the following hardware and
software are required:
PC
® ®
• Microsoft Windows 2000/XP or Microsoft
Windows Vista™ is installed
• With USB port
Other item
Optional OPC-1122U * CLONING CABLE (USB type)
NOTE:
To use the OPC-1122U, USB type cloning cable, USB
driver installation is necessary. The driver is supplied
with the OPC-1122U. See the OPC-1122U instruction
manual for the installation details.
*The USB driver, supplied with the OPC-1122U, is not
supported for Microsoft ® Windows Vista™(64 bit).
Software installation]
1. Quit all applications when Windows is running.
2. Insert the CD into the appropriate CD drive.
3. Double-click the "Setup.exe" contained in the CD.
4. The "Welcome to the InstallShield Wizard for CS-
FR5100" will appear as below. Click [Next>].
5.The "User Information" will appear as below, then
type your name, your company name and the product
ID number with the following manner. Then click [Next
>].
• ID number: 306401-(6 digit serial number)
• e.g. the serial number on the CD is 000001, enter
"306401-000001" as the ID number.
Note 1: Icom distributes cloning software by CD or license. Depending on this, some information here may not
apply as written, e.g. ID number.
4-2

Cloning Software CS-FR5100

4-2-1 Basic Setup of Cloning Software
®
6. The "Choose Destination Location" will appear as
below. Then click [Next>] to install the software to
the destination folder. (e.g. C:\Program
Files\Icom\CS-FR5100)
• Click [Browse...] to select another destination folder
before clicking [Next >], if desired.
7. After the installation is completed, the "InstallShield
Wizard Complete" will appear as below. Then click
[Finish].
8. Eject the CD.
9. Program group 'CS-FR5100' appears in the
'Programs' folder of the start menu, and 'CS-
FR5100' short cut icon appears on the desktop
screen.
• To uninstall the cloning software, select the "Control
Panel" in the start menu, and click the "Add or
Remove Programs."
Then, select the program group 'Icom CS-FR5100'
and click [Remove].
25