Cloning Items - Icom IC-FR5100 Series Handbook

Cloning items

Common Setting
Key & Display
Assign one of several functions to the Dealer
assignable keys, set the beep audio frequency, Display
conditions, Select the transmit output power etc.
Set Mode
For setting the following items in the repeater's user set
mode to "Inhibit" or "Enable", and adjust the
appropriate setting.
The items includes Backlight, LCD Contrast, Fan, Beep,
SQL Level, AF Min Level, Mic Gain, Signal Moni,
System info, LCD Check, Information, and Key Check.
Common
Commonly set items such as Clone Comment (1)/(2),
Security, Auto Reset, TOT, Lockout, Repeater Hold
Timer, PTT Encode Tone, EPPT Delay Timer, RS-
232C, Scrambler, Low Voltage 1 and 2 value, Beat
Cancel, Wide Band Width, Front Speaker, and Digital
Function.
Memory CH
The 'Memory CH' window allow you to edit the channel
information. Editable items such as RX/TX Frequency,
Time-Out-Timer, Scan List, CW ID, TX C.Tone,
Wide/Narrow, Compander, 5-Tone setting, Digital
Setting, Scrambler/Encryption OFF/ON/Inhibit etc.
Digital*
Individual ID List
Set the Individual ID within 0 to 65519, or 65535 and
Enter up to a 12-character Individual ID name.
Encryption
A total of 63 encryption settings are available.
Set the Encryption Key from 0001 to 7FFF
(hexadecimal number) to each Encryption No.
ANI
Set the display condition of Talkgroup ID and Unit ID.
DTMF
DTMF Encode
Program a DTMF code up to 24 digits for
acknowledgement.
DTMF Decode
Program a DTMF code up to 24 digits for DTMF
decode operation.
DTMF Setting
Set PTT Delay, No tone Timer, *# Timer, DTMF Timer,
1st Timer, ANI Display Timer, Decode with C. Tone,
etc.
Continuous Tone
Set the Tone Burst, Tone Burst Timer, User CTCSS
Freq, TX DTCS Inverse and RX DTCS Inverse.
* Digital mode must be enabled for this functionality.
4-2-2 Cloning Items
SCAN
Scan List
A total of 17 scanning lists are available for a wide
variety and flexible scanning operation.
Scan Setting
Set the timer for Watch, Watch Unmatch, Resume,
Talk Back, Fast Scan, Slow Scan, and set the
functions such as Power ON Scan, Nuisance Delete,
Mode Dependent Scan, Monitor Key Action, Talk
Back Timer Beep.
5Tone
RX Code CH
Set RX Code, text, ABC, Aud Mode, Emer, Beep, ext.
RX Code Setting
Set Link A Timer, Compare Digit, ID Decode Timer
and Auto Timer.
TX Code CH
Set TX Code, Text, Input Digit, Update, ABC condition,
and Sel.
TX Code Setting
Set Long Tone Timer, Link R/1/2 Timer, Lead Out
Delay Timer, ABC Decode Timer, etc.
Format
Set the Tone Period for a tone encoder, Notone Timer
and Tone Length.
User Tone
Set the encode tone frequency, the lower and higher
edge of the tone decode frequency range. And check
the 'Auto' check-box so that the recommended
decode frequencies are automatically set.
Multiple Table
Enter up to 16 C.Tone and/or RAN code in each Multi
Table.
CW
Program up to a 32-digit CW ID, Set the Interval time,
select the Standard Word, set the CW speed etc.
External I/O
CH Switch Table
Assign the transceiver's memory channel to each Ext
CH No.
Port Setting of D-Sub 25 pin
Assign a function to [Ext. I/O 15 to 25] and [Ext. D/A
10]
NOTE: The above instructions are for reference
only.
Please refer to the HELP file of the cloning
software for the function or setting details.
27