Icom IC-FR5100 Series Handbook page 33

Secondary CH (Available when "Priority Scan" is
selected in Scan Type.)
Select the desired channel as a secondary channel.
The selected channel is monitored during priority scan.
The secondary channel is lower priority than the
primary channel.
The secondary channel is not used.
Disable
The priority A channel is used as the
Prio-A CH
secondary channel.
The priority B channel is used as the
Prio-B CH
secondary channel.
Scan start channel is used as the
Start CH
secondary channel.
The selected channel is used as the
CH Number
secondary channel.
Select
TX CH (Available when "Normal Scan" or "Priority
Scan" is selected in Scan Type.)
Select the desired channel as a transmission channel.
Transmission is performed in the last
Last CH
busy channel. If thee is no busy
channel, the scan start channel is
selected for transmission.
Transmission is performed on the
Prio-A CH
priority A channel.
Transmission is performed on the
Prio-B CH
priority B channel.
Transmission is performed on the scan
Start CH
start channel.
Transmission is performed on the
CH Number
selected channel.
Select
Talk Back (Available when "Normal Scan" or
"Priority Scan" is selected in Scan Type.)
Select the talk back function ON or OFF.
If "Last CH" is selected in TX CH, this function is not
available.
When transmission is performed within the
ON
talk back timer time* (after the resume
timer has passed), the signal is transmitted
on the last busy channel.
Even if transmission is performed within
OFF
the talk back timer time* (after the resume
timer has passed), the signal is transmitted
on the channel that is selected in TX CH.
• Talk back timer is set in Talk Back (Sec) in the
Scan Setting screen.
Scan
TX Action (Available when "Normal Scan" or
"Priority Scan" is selected in Scan Type.)
Select the scan condition when transmission is
performed during scanning.
Cancel
Scan
Pause
Scan
* Resume timer is set in Resume (Sec) in Scan
Setting screen.
Cancel CH (Available when "Normal Scan" or
"Priority Scan" is selected in Scan Type.)
Select the desired channel type that is selected
when scan is cancelled (except for transmission.)
Start CH
Start
CH/Talk
Back
TX CH
TX
CH/Talk
Back
Text
Select the text indication capability from OFF, Text or
Start CH during scan.
The text indication is turned OFF.
OFF
The text indication is turned ON. The
Text
channel's text that is programmed in
Display Text as above is indicated during
scan.
The text indication is turned ON. The scan
Start
start channel's text is indicated during scan.
CH
Scan is canceled and transmission is
performed on the channel that is
selected in TX CH.
If Talk Back is turned ON and
transmission is performed within the
talk back timer time, the signal is
transmitted on the last busy channel.
Scan is paused until the signal
disappears and then resumes after the
resume timer time* has passed.
The scan start channel is selected
automatically.
The scan start channel is selected
automatically when scan is canceled
during scanning.
The last busy channel is selected
automatically when scan is canceled while
receiving a signal, or during scanning
within the talk back timer time (after the
resume timer has passed).
The channel that is selected in TX CH is
selected automatically.
The channel that is selected in TX CH is
selected automatically when scan is
canceled during scanning.
The last busy channel is selected
automatically when scan is canceled while
receiving a signal, or during scanning
within the talk back timer time (after the
resume timer has passed).
33