Control Panel Assembly; Electrical Connection - REMEHA P 420 Assembly Instructions Manual

Hide thumbs Also See for P 420:

Table of Contents

21 Control panel assembly

* except NL (see instructions delivered with the water low safety

pressure-sensitive switch)

- Carefully unroll and take out the various bulbs from the control

panel, passing them through the opening in the front cover.

All connections are made with the terminal boxes designed for that

purpose on the back of the boiler's command board.

Connections must be made by a qualified technician.

02/04/08 - 300016854-001-A

(1) Front - (2) Rear

Position the control panel in the rear bushes.

Open the control panel by unscrewing the 2 screws on the front

of the panel.

- Then, insert the bulbs inside the pocket and maintain them with the

spring.

- At the front, screw the control panel to the cover using 2 self-

tapping screws Ø 3.9x12.7 + serrated washers (Phillips

screwdriver).

P 420

Table of Contents