REMEHA P 420 Assembly Instructions Manual page 8

6 Assembling the sections
A : Thermocord
Special intermediate section in front of rear section.
Place the first special intermediate section, making sure that it is turned in the right direction, i.e. with the flattening groove against the
thermocord.
For safety reasons, insert an upper assembly rod (loose boiler body accessories package) into the holes in the 2 sections.
Push the section gently and simultaneously on the 2 nipples of the rear section with a hammer and a piece of wood positioned in line with
the bores.
8
P 420 02/04/08 - 300016854-001-A